Adding An H300 Water Filter To Your Home

Adding An H300 Water Filter To Your Home

Having clean drinking water is something that most homeowners take for granted. It is only when a noticeable drop in water quality occurs that most homeowners even consider the need for a dedicated water filtration system. Obvious contaminants or a noticeable chlorine taste and odor might be an indicator that filtration is needed, but even crystal clear water can be unsafe to consume. Adding a system like an H300 water filter to your home is one of the best ways to ensure that your drinking water is actually safe to consume.

The Everpure H-300 water filtration system is designed to offer the ideal balance between water quality and ease of use. Unlike common filtered water pitchers, Everpure systems do not require daily refilling or monthly water filter replacement. In addition to offering a longer filter life, these systems are also designed to offer superior filtration to other systems.

Part of the reason that these systems offer such incredible results is the fact that they operate under pressure by hooking directly into your home’s water line. Home water lines typically run at around 40 PSI, meaning that water is forced through an Everpure cartridge with significantly more force than gravity can provide when using a pitcher system.

In order to offer easy access to your water lines and keep your filter out of sight, Everpure systems like the H300 water filter are designed to be mounted underneath your kitchen sink. They are mounted to the side of the cabinet below your sink, near where you are already getting your drinking water. The filter uses the cold water line of your existing faucet. A special adapter allows water to be diverted away from your faucet without affecting its function.

Once water is diverted, it goes through a special filter head that feeds water into the water filter cartridge. Everpure water filter cartridges are designed to reduce the presence of particles as small as 0.5 microns in your drinking water. To understand the scale of a micron, a single hair is about 50 microns wide, meaning that these cartridges can reduce the presence of contaminants 100 times smaller than a hair’s width. These Everpure filter cartridges are designed with special pleated filter media membranes that are designed to increase the flow rate from your filter system.

After water passes through an Everpure filter cartridge, it is diverted to a small air gap faucet that serves as a filtered water dispenser. This does mean that homeowners will have to plan on installing a new fixture near their sink. Luckily there are a wide variety of small faucets available that are a perfect fit for these filters. If the prospect of adding a new fixture to your kitchen is not ideal, Everpure also produces a number of full flow systems that dispense their fresh water using the cold water side of your existing faucet.

No matter which Everpure system you chose to install, the maintenance requirements are minimal. Most filters will need only one replacement cartridge per year. If you have an H300 water filter, every cartridge is designed to filter 300 gallons of water. If you notice that you are consuming enough water that you require multiple filter replacements per year, you can always upgrade your cartridge to one with a large capacity. To learn more about Everpure systems, their capabilities, and what a difference they can make in your home, The team at efilters are filtration experts who have years of experience working with both home and commercial grade Everpure water filters.

For more information about Everpure Water Filter Cartridge and Buy Ro Water Purifier Please visit : Efilters.

1 Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below